© copyright 2009 - East Coast Lumber
Phone: (603) 329-5322 NE: 1-800-682-6006 Fax: (603) 329-8089
PO Box 530, Route 111 East Hampstead, NH 03826
Cabot Semi-Transparent
Siding and Fence Stain
- Oil Based and Acrylic water based formulas available
- Lightly pigmented to accentuate wood grain
- Ideal for siding and shingles
- Water repellent and UV protection
- Do not thin
- Do not mix Semi-Solid oil-based stains with Semi-Solid water-based stains
- Not intended for decks or interior surfaces
- Won't crack, peel or blister when applied properly
- A one-coat application is recommended
Where to use
Cabot Semi-Transparent Stains are for use on exterior wood siding, shingles, shakes and roofs. They are especially effective on rough-sawn surfaces; and excellent results are obtained on premium grade lumber such as Cedar, Fir, Pine, Cypress, Spruce, Redwood and plywood panel siding. Acrylic is ideal for natural wood siding and log homes as well.
Features
Cabot Semi-Transparent Stains are deep penetrating, linseed oil-based stains that beautify and protect exterior wood. These lightly pigmented stains enhance the natural beauty of the wood by allowing the grain, texture, and color variations within the wood to show through. Acrylic #1300 series combines penetrating properties of oil-based coatings with the easy soap & water clean-up of water-based finishes. It will provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fading, earth tone pigments to weather slowly over time.
Coverage
On smooth surfaces, approximately 400-600 sq ft per gallon; on rough surfaces, 150-250 sq ft per gallon. Acrylic covers 200-300 sq ft per gallon; on rough surfaces, 100-200 sq ft per gallon. These rates will vary depending upon the porosity of the surface.
Oil series #6300
Acrylic series #1300
